Disk Enclosures
1751710 Members
5067 Online
108781 Solutions
New Discussion юеВ

LX Pro Netraid Controller Error Message

 
Phil Vis
New Member

LX Pro Netraid Controller Error Message

We have an LX Pro running a Netraid 3Si controller. Netraid Assistant intermittently reports the following message in the log: "NOTIFY: Check condition on Ch 1 ID 4 with the following sense key - date/time stamp
70 00 01 00 00 00 0
0a 00 00 00 00 5d 0"

The drive indicated has been changed twice - no change.

Does anyone have any insight into what the error message means?
Never give up
3 REPLIES 3
Roger Faucher
Honored Contributor

Re: LX Pro Netraid Controller Error Message

Make sure you have the latest Netraid 3Si drivers and downloads from the following web page:

http://www.hp.com/cposupport/swindexes/hpnetraid-11086_swen.html

and for the LX Pro from:

http://www.hp.com/cposupport/swindexes/nslxep_swen.html

Hope this helps. If not, let us know!
Make a great day!

Roger
Vincenzo Restuccia
Honored Contributor

Re: LX Pro Netraid Controller Error Message

SCSI termintion is ok?
RAMY NAGUIB
Frequent Advisor

Re: LX Pro Netraid Controller Error Message

Assuming you have the latest BIOS versions for the 3Si and the NetServer it self "this is extreamly important.
Try runing check consistency from the NetRaid utility under the NT on the Raid array containing drive 4.
Note that this error indicate a pre-failure notification ,may be check consistency can help you.
Good Luck