Disk Enclosures
1748211 Members
4646 Online
108759 Solutions
New Discussion юеВ

License information for LUN manager

 
SOLVED
Go to solution
Neil Moran_1
New Member

License information for LUN manager

I have va7410 disk array on HP 11i servers that I manage with HP StorageWorks Command View SDM version A.1.06.00. Who do I find out the how many TBs that I am licensed for? I know that the LUN manager license is sold in TB increments.
6 REPLIES 6
Torsten.
Acclaimed Contributor

Re: License information for LUN manager

I'm not aware of a "LUN manager" for this array, but business copy and secure manager are licenced.

BTW, CV SDM 1.06 is really old - 1.09.02 is current.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Neil Moran_1
New Member

Re: License information for LUN manager

It is the Secure Manager that I need to know how much the license is for.
Torsten.
Acclaimed Contributor
Solution

Re: License information for LUN manager

Try

armfeature -r

or use the GUI.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jeff_Traigle
Honored Contributor

Re: License information for LUN manager

Ours shows the total number of licensed space under the License tab. It's part of the feature name. From the command line, it looks like armfeature might be what you want. (Didn't run it, but the man page description looked promising.)
--
Jeff Traigle
Neil Moran_1
New Member

Re: License information for LUN manager

Thanks Torsten, I used the following command to find out that I had 1500 MB license.

# ./armfeature -r HPA6218A00SG228J0115

FEATURE LICENSE KEY STATE
================================================================================
LUN_SECURITY_1500GB 734D983F6FB6 Active
#
Neil Moran_1
New Member

Re: License information for LUN manager

Thanks again for your quick response.