HPE Community
Disk Enclosures
1753847 Members
8648 Online
108807 Solutions
New Discussion

Re: Logical drives swapped

 
Paul_338
Occasional Contributor

‎04-08-2004 04:55 AM

‎04-08-2004 04:55 AM

Logical drives swapped

I have a DL380G2 with Smart Array 5302 128MB and 6 * 18GB hard drives configed as RAID 0+1 in Array A (boot drive). Later I bought a brand new HP 4314R disk Array enclosure and insert 14*146GB hard drives and configured it as a Raid 5 array. I found that the new array (Raid 5) has become Array A and the original array has become array B so that I can't boot the server any more. Please provide any solutions in additional to adding one more Smart Array card. Thans a lot.
0 Kudos
Reply
1 REPLY 1
R.Bauer
New Member

‎04-19-2004 10:07 PM

‎04-19-2004 10:07 PM

Re: Logical drives swapped

Hi,

The drive cage connected to the first SCSI Channel (A?) becomes array A and the array connected to the second array becomes B.
So in your case, swap the SCSI connectors on the array controllers, and your arrays will also swap.

Reinier.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.