Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

ML350 Array Configuration Problem

Jeff Chambers_2
Occasional Advisor

ML350 Array Configuration Problem

Hi,

I'm trying to setup two disk arrays on an ML350 server. I have tried various versions of smartstart 6.10/6.20/6.30 and 7.20 however within all of these the Array Configuration Utility fails to detect a supported array controller.
I can see all the disks happily from within w2K3 so a controller is obviously working?

It is apparently a :-
64-bit-66MHz-Dual-Channel-Wide Ultra3 SCSI HOST BUS ADAPTER

How do I setup my drive arrays?

Jeff