MPIO management command

[inex]

Anyone knows if there are any mpio management cli commands to list paths on wind2003/08 platform?

-inex

[kris rombauts · Accepted solution]

If you open the HP DSM CLI and type hpdsm /? then you get a lit of all possible CLI commands.

i.e. C:\Program Files\Hewlett-Packard\HP MPIO DSM\EVA DSM\X86>hpdsm /?


C:\Program Files\Hewlett-Packard\HP MPIO DSM\EVA DSM\X86>hpdsm devices all


Total No. of Devices:1

Device#:1 Device Name:HP HSV210
Serial No:xxxx08B4001074AE0000C00000630000 Active Paths: 8
Policy:SQST Disk 1
P.B.T.L.:4.0.3.2 ALB:N

Path# Controller Port# State HBA Slot# RTP P.B.T.L
------------------------------------------------------------------------------------------
1 P8398F3AASC0J7-1 Active 1 00010001 3.0.0.2
2 P8398F3AASC0J7-2 Active 1 00010002 3.0.1.2
3 P8398F3AASC0J7-3 Active 1 00010003 3.0.2.2
4 P8398F3AASC0J7-4 Active 1 00010004 3.0.3.2
5 P8398F3AASC0H0-1 Active 1 00020005 4.0.0.2
6 P8398F3AASC0H0-2 Active 1 00020006 4.0.1.2
7 P8398F3AASC0H0-3 Active 1 00020007 4.0.2.2
8 P8398F3AASC0H0-4 Active 1 00020008 4.0.3.2

---------------------------------------------------------------------------------------

HTH

Kris