Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA 30 Dual BUS Question

SOLVED
Go to solution

MSA 30 Dual BUS Question

Hi,

Is it possible to connect a MSA30 Dual Bus enclsure to two different servers and configure 7 disks to each servers? Server A should not be able to see the disks attached to server B.

We are planning to have 2x rp3410 servers with RAID adapters connected to a MSA30 DB in the above mentioned way if its a workable solution.

Where can I find MSA30 DB user guide ??


Thanks in advance,

Naveen
3 REPLIES
Glenn N Wuenstel
Valued Contributor
Solution

Re: MSA 30 Dual BUS Question

Naveen,
You can certainly connect the MSA30 in this fashion. It will function as if it were two arrays. The only difference is that the arrays rely on the same power supplies, midplane, etc.
Here is the link to the MSA30 pages on the HP website:
http://h18004.www1.hp.com/products/servers/proliantstorage/sharedstorage/sacluster/msa30/index.html

Glenn
Duncan Edmonstone
Honored Contributor

Re: MSA 30 Dual BUS Question

will the hpux boxes be running serviceguard? thats not supported with the msa30db, or RAID cards (you must use the msa30mi and standard scsi hba)

HTH

duncan

HTH

Duncan