MSA-30DB with HP-UX

[Michael E. Collins_1]

What is the command line to get into the software to modify the MSA-30DB configuration.
thanks

[Markus_10 · Accepted solution]

It is saconf and sautil when using a Smart Array Controller.

When using a normal SCSI Controller you use the lvm command line options

Regards
markus

[Uwe Zessin]

The MSA30 DB is a simple disk drive enclosure (a JBOD in HP speak) with two SCSI busses, but without an embedded RAID controller. There is no command interface to change anything on the box itself.

[Markus_10]

Hi Uwe ;-)

Not in the box - but in the smart arry ;-)))

Greets
Markus (CXO Event)

[Uwe Zessin]

Hello Markus,
now I fully understand what you meant, thanks!