- Community Home
- >
- Storage
- >
- Entry Storage Systems
- >
- Disk Enclosures
- >
- MSA1000 ADG logical drive Corruption after rebuild
Disk Enclosures
1752372
Members
6036
Online
108787
Solutions
Forums
Categories
Company
Local Language
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Discussions
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-16-2008 12:00 PM
01-16-2008 12:00 PM
MSA1000 ADG logical drive Corruption after rebuild
Hi all,
We have just had a disk fail in our MSA1000 which has rebuilt on the hot spare of identical size and speed, however whilst rebuilding one of the logical drives is now reporting corruption, this is the second time this has happened on the same logical drive, it has not occurred on any other of the logical drives.
Can anyone tell me why it is only affecting one logical drives and not the whole array and what could be causing the corruption
Thanks
Mark
We have just had a disk fail in our MSA1000 which has rebuilt on the hot spare of identical size and speed, however whilst rebuilding one of the logical drives is now reporting corruption, this is the second time this has happened on the same logical drive, it has not occurred on any other of the logical drives.
Can anyone tell me why it is only affecting one logical drives and not the whole array and what could be causing the corruption
Thanks
Mark
1 REPLY 1
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
01-25-2008 03:14 PM
01-25-2008 03:14 PM
Re: MSA1000 ADG logical drive Corruption after rebuild
Hi Mark,
Can you state if there is more than one logical drive in the array, the reason I ask this is if one logical drive was corrupted you should see other logical drives in the same array have corruption
also can you find out what firmware verison the MSA controllers are running. You can get this information from ACU or from the CLI by issuing the command "show this_controller"
I would also recommend opening a case with HP support so they can look into the issue.
Tom
Can you state if there is more than one logical drive in the array, the reason I ask this is if one logical drive was corrupted you should see other logical drives in the same array have corruption
also can you find out what firmware verison the MSA controllers are running. You can get this information from ACU or from the CLI by issuing the command "show this_controller"
I would also recommend opening a case with HP support so they can look into the issue.
Tom
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP