Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA1000 Config Query

Mark Hardy_2
Occasional Advisor

MSA1000 Config Query

I asked this question a few months ago but cannot remember the answer! Hopefully someone can help again.

I presently have a MSA1000 with two MSA30-DB's, the MSA1000 with two embedded fibre switches connected to dual Windows 2003 hosts in an Active/Active cluster, using SecurePath.

I now need to add additional storage and am looking at procuring another MSA1000.

Does anyone know if it would be possible or supported to connect the new MSA1000 (with dual controllers) into each of the fibre switches that I have in my existing MSA1000 ?

If you look at all of the component then this should be possible but was hoping someone may have tried this or if they know if it is a supported configuration.

Thanks for any help or guidance.
Mark
1 REPLY
Stephen Kebbell
Honored Contributor

Re: MSA1000 Config Query

Hi Mark,

just look in your forums profile (click on your name in the post). You can find your own old threads.
Here's your thread from May:
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1030484

Regards,
Stephen