MSA1500 SSP showing old/replaced HBA

[IvanForceville]

Dear,

We have an 4xHP Proliants (DL380G4 & DL585G2) connected through redundant san switches on an MSA1500.

One of the HBA's on the DL585G2 became defective and was replaced.
The WWN of the new HBA showed up in SSP and I gave it access to LUN4.

The old WWN of the previous HBA is still showing in SSP. How can I remove this WWN from the system? It's the "Uknown" one in the screenshot.

[Paul Richardson_6]

I also have this problem. Did you ever resolve it?

[John Kufrovich · Accepted solution]

Just go into SSP,
Name the SSP, "Unknown" and Profile = "default". click save.

[Matthew Mitchell]

You must use the Console Cable for the MSA and then use the following command:

delete connection