Community
Disk Enclosures

MSA20 MSA 20 running with 1000GB (1TB) or 2000GB (2TB) SATA disks

 
MatthewWright
Occasional Contributor

‎07-05-2011 05:48 AM

‎07-05-2011 05:48 AM

MSA20 MSA 20 running with 1000GB (1TB) or 2000GB (2TB) SATA disks

Hi,

 

I'm interested in an update if anyone has managed to get an MSA 20 MSA20 running with 1TB or 2TB sata disks.


I tried a 3TB (3000GB) and it came up as a 801MB disk so that was a big fail.


not confident I have upped the firmware properly.  I ran the smart start CD but I did it in unattended mode so not sure if it did the job will have to return to the site and do it again.

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎07-05-2011 06:05 AM

‎07-05-2011 06:05 AM

Re: MSA20 MSA 20 running with 1000GB (1TB) or 2000GB (2TB) SATA disks

The quickspecs lists the supported disks, up to 1TB:

 

http://h18000.www1.hp.com/products/quickspecs/11942_div/11942_div.html


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
MatthewWright
Occasional Contributor

‎07-06-2011 03:36 PM

‎07-06-2011 03:36 PM

Re: MSA20 MSA 20 running with 1000GB (1TB) or 2000GB (2TB) SATA disks

There are posts on these forums where people are claiming 2TB drives are working with the MSA20

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.