HPE Community
Disk Enclosures
1753511 Members
5070 Online
108795 Solutions
New Discussion

MSA2312FC: Add new enclosure

 
ZaEzzz
Occasional Visitor

‎11-12-2013 11:35 PM

‎11-12-2013 11:35 PM

MSA2312FC: Add new enclosure

Hi!

 

Given:

- MSA2312fc

- 3 enclosure in work (circuit in the attachment)

- New P2000 G3 SAS with AW592B controller

 

Need:

- Add P2000 in array as enclosure 4 or enclosure 2

- Save all data and configure (array in work and used)

 

I need help!

I can not find information from the configuration instructions "step by step".

 

I'm sorry for my english
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎11-13-2013 07:51 AM

‎11-13-2013 07:51 AM

Re: MSA2312FC: Add new enclosure

You have an existing MSA2000 G2 and a new P2000 G3, right?

The P2000 cannot be an expansion of the MSA, it is a complete array, you need expansion enclosures (e.g. MSA70, etc).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.