HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

MSA30 Dual Bus and DL380 G4 servers

 
Bogdan_G
Occasional Visitor

MSA30 Dual Bus and DL380 G4 servers

Hi,

I would like to know that is manner of connection a MSA30 Dual Bus enclsure to two different DL380 G4 servers with Smart Array 6402 RAID adapters.

I would like to configure 5 disks to each server. Server A should not be able to see the disks attached to server B.

Where can I find MSA30 DB PROPER user guide ??


Thanks in advance,

Bogdan_G
2 REPLIES
Uwe Zessin
Honored Contributor

Re: MSA30 Dual Bus and DL380 G4 servers

While the two SCSI busses are separated, I don't think that it is supported nor a good idea, because modern RAID controllers talk to the EMU. There have been reports about strange behaviour when an MSA30 DB was connected to two different MSA1000.

Link to the MSA30 documentation:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=101&prodTypeId=12169&prodSeriesId=373244
.
Bogdan_G
Occasional Visitor

Re: MSA30 Dual Bus and DL380 G4 servers

I was have damaged a second port i my dual bus I/O unit.