- Community Home
- >
- Storage
- >
- Entry Storage Systems
- >
- Disk Enclosures
- >
- MSA70 Expansion / Cabling
Disk Enclosures
1753481
Members
4113
Online
108794
Solutions
Forums
Categories
Company
Local Language
юдл
back
Forums
Discussions
Forums
- Data Protection and Retention
- Entry Storage Systems
- Legacy
- Midrange and Enterprise Storage
- Storage Networking
- HPE Nimble Storage
Discussions
Discussions
Discussions
Forums
Forums
Discussions
юдл
back
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
- BladeSystem Infrastructure and Application Solutions
- Appliance Servers
- Alpha Servers
- BackOffice Products
- Internet Products
- HPE 9000 and HPE e3000 Servers
- Networking
- Netservers
- Secure OS Software for Linux
- Server Management (Insight Manager 7)
- Windows Server 2003
- Operating System - Tru64 Unix
- ProLiant Deployment and Provisioning
- Linux-Based Community / Regional
- Microsoft System Center Integration
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Discussion Boards
Blogs
Information
Community
Resources
Community Language
Language
Forums
Blogs
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО02-15-2011 12:45 AM
тАО02-15-2011 12:45 AM
MSA70 Expansion / Cabling
Hi,
I plan now to expand our MSA70. And with the wiring I'm not sure.
Current status:
- 1 Server, 1 Enclosure (single enclosure configuration)
Should state:
- the existing system should be as remain
- in the server there is an additional Raid Controller
- on this raid controller should be connected by dual domain cabling 2x Enclosures
Unfortunately, these variants instructions not to install. There is only dual domain cabling
with 1x Enclosure and 3x Enclosure!Not with dual domain cabling and 2x Enclosures.
Link to the Installation instruction:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01444146/c01444146.pdf
Thanks !
I plan now to expand our MSA70. And with the wiring I'm not sure.
Current status:
- 1 Server, 1 Enclosure (single enclosure configuration)
Should state:
- the existing system should be as remain
- in the server there is an additional Raid Controller
- on this raid controller should be connected by dual domain cabling 2x Enclosures
Unfortunately, these variants instructions not to install. There is only dual domain cabling
with 1x Enclosure and 3x Enclosure!Not with dual domain cabling and 2x Enclosures.
Link to the Installation instruction:
http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01444146/c01444146.pdf
Thanks !
2 REPLIES 2
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО02-15-2011 02:43 PM
тАО02-15-2011 02:43 PM
Re: MSA70 Expansion / Cabling
Yes.
2 or 3, it's the same.
It's stait forward.
You can printout the instruction. and draw 2 lines through enclosure 2, as it was not there.
BR
/jag
2 or 3, it's the same.
It's stait forward.
You can printout the instruction. and draw 2 lines through enclosure 2, as it was not there.
BR
/jag
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
тАО02-16-2011 12:33 AM
тАО02-16-2011 12:33 AM
Re: MSA70 Expansion / Cabling
There's an In port and a Out port, on all enclosures.
Cable from HBA to in port
Cable from out port to in port on the next.
If you have more you continou from out to in.
In the guide they take the upper HBA port, and put in the in port on the upper enclosure.
Then they go from the put port on the upper enclosure, to in port on the enclosure below.
and the next the next.
You only need to go out to in, once.
The other port of the HBA go to the other side, and start from the bottom.
HBA > In - Out > in .......
HBA > In - Out > in .......
BR
/jag
Cable from HBA to in port
Cable from out port to in port on the next.
If you have more you continou from out to in.
In the guide they take the upper HBA port, and put in the in port on the upper enclosure.
Then they go from the put port on the upper enclosure, to in port on the enclosure below.
and the next the next.
You only need to go out to in, once.
The other port of the HBA go to the other side, and start from the bottom.
HBA > In - Out > in .......
HBA > In - Out > in .......
BR
/jag
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
News and Events
Support
© Copyright 2024 Hewlett Packard Enterprise Development LP