Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Mirroring setups with hpacucli

Darren Dunham
Occasional Visitor

Mirroring setups with hpacucli

I'm trying to set up a pair of MSA 70 units attached to the same card. I'd like to do 1+0, but make sure that mirroring is done between the units.

I'm having difficulty determining how to do that, or how to verify what's mirrored to what. When I examine a simple 4 drive setup, I can't tell from the output where the mirror lives.

array A (SAS, Unused Space: 0 MB)

logicaldrive 1 (136.7 GB, RAID 1+0, OK)

physicaldrive 1E:1:1 (port 1E:box 1:bay 1, SAS, 72 GB, OK)
physicaldrive 1E:1:2 (port 1E:box 1:bay 2, SAS, 72 GB, OK)
physicaldrive 2E:1:1 (port 2E:box 1:bay 1, SAS, 72 GB, OK)
physicaldrive 2E:1:2 (port 2E:box 1:bay 2, SAS, 72 GB, OK)

Is there a simple way to request a mirror between ports, or to view where the mirror pairs exist here?

Thanks!

--
Darren