Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Monitor EVA4400 with MRTG?

JorisK
Regular Advisor

Monitor EVA4400 with MRTG?

Hi,

Simple question:

We have an HP EVA4400 and i wonder if it's possible to monitor controller performance using mrtg?
6 REPLIES
Víctor Cespón
Honored Contributor

Re: Monitor EVA4400 with MRTG?

MRTG (Multi Router Traffic Grapher) ? That's a tool to monitor IP traffic.

You can see many performance statistics on the EVA through Windows performance monitor. EVAperf adds several counters to the list.
JorisK
Regular Advisor

Re: Monitor EVA4400 with MRTG?

MRTG doesn't monitor IP traffic, it monitors SMNP output and by using the correct OID's i should be able to monitor some EVA values aswell.

Does the system support SMTP?
Torsten.
Acclaimed Contributor

Re: Monitor EVA4400 with MRTG?

SMTP or SNMP?

In fact, when SBM (server based management) is used, you still need commandview to manage. From there you can use other tools (WEBES) to notify in different ways, mail and SNMP too.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JorisK
Regular Advisor

Re: Monitor EVA4400 with MRTG?

Oops, i mean SNMP, sorry about that ;)

So i could use WEBES to send out SNMP traps, is that right?
Torsten.
Acclaimed Contributor

Re: Monitor EVA4400 with MRTG?

Yes, but with WEBES and CV you already have a management solution.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
JorisK
Regular Advisor

Re: Monitor EVA4400 with MRTG?

Yes,

But i want to have one management page that contains all my hardware info. For example, my current mrtg pages show port utilization on procurve switches, juniper firewalls, cpu loads etc.

I want to add the EVA load aswell, to keep everything nice and neat on one single view.