Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Navisphere MIB or Fibre Alliance MIB

Fred Henderson
Occasional Contributor

Navisphere MIB or Fibre Alliance MIB

I'm receiving SNMP Traps from our Navisphere application that is connected to our EMC SAN. But I'm a hard time finding the actual MIB that is going to define the event.

Please see that atached file to see the Received Event

Fred.Henderson@t-netix.com
3 REPLIES
James A. Donovan
Honored Contributor

Re: Navisphere MIB or Fibre Alliance MIB

You can get the Fibre Alliance MIB from here.

http://www.fibrealliance.org/fb/mib_intro.htm
Remember, wherever you go, there you are...
Fred Henderson
Occasional Contributor

Re: Navisphere MIB or Fibre Alliance MIB

Jim,

Thanks for the Reply. I attempted to use the this site to get the MIB. But it appears that the MIB that I downloaded was a text file. I renamed the text file to MIB 2_2.mib. I attempted to load the mib. I got an error message.

"Error Detected while load MIB File: D|\program files\NNM\SNMP_MIBs\vendor..... This MIB Cannot be loaded until the following problem is corrected.

[FCMGMT-MIB] - Line 17: Error Defining Object:Found 'FcNameID'

Do you have any ideas on how to resolve this issue?
James A. Donovan
Honored Contributor

Re: Navisphere MIB or Fibre Alliance MIB

I'm afraid not. Here's an alternate source for the MIB. It's the 2.6 version not the 4.0.

http://h18000.www1.hp.com/products/storageworks/softwaredrivers/fcsanswitch816/mibv26.html

You should post your issue in the Openview NNM forum. You're likely to get a good answer there.

http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=165
Remember, wherever you go, there you are...