HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Netserver Storage System 6

 
Solomon Alexandrea_1
Occasional Visitor

Netserver Storage System 6

External Storage System 6 flashes HP then L.F. ( the dot after the "F" flashes
twice). The flip between HP and LF is continual. Anyone know if this is an
error.
RAID 5 stripe (NetRaid Controller with latest FW and BIOS). All data appears
to be intact.
1 REPLY
Franco Cenati
Valued Contributor

Re: Netserver Storage System 6

LF means LINE FAILURE.
The model B of the SS6 has two power supplies and needs two power cords.
If you have installed only one power cord or the 110/220 Volts are missing you see LF on the display. IF a power Supply fails you should see PF