P2000 G3 FC / SCVMM 2012 no Volume Copy and Snapshot possible!

[djjones73]

Hi

Brand new installation of SCVMM 2012 (no SP1 !!!). Storage Array connected successfully to SCVMM via SMI-S.

Classification and Pools already defined.

Unfortunately can't create any LUNs, deploy SAN Copy/Snapshot because of bunch of errors:

1. Create LUN via SCVMM:

=========================================================

Error (26135)
Creating storage logical unit <LUN NAME> storage pool 208000c0ff13d4ca:00c0ff13b9b00000aa37965200000000 on failed with error code Failed .

Recommended Action
Specify valid parameters for creating logical unit.

=========================================================

2. Deploy VM via SAN Snapshot (Storage Array Settings - Use snapshots):

=========================================================

Error (20400)
1 parallel subtasks failed during execution.

Error (26118)
Creating snapshot of storage logical unit 600C0FF00013B9BD145A965201000000 failed with error code Failed .

Recommended Action
Specify valid parameters for creating snapshot.

=========================================================

3. Deploy VM via SAN Copy (Storage Array Settings - Clone logical units):

=========================================================

Error (20400)
1 parallel subtasks failed during execution.

Error (26119)
Creating clone of storage logical unit 600C0FF00013B9BD145A965201000000 failed with error code Failed .

Recommended Action
Specify valid parameters for creating clone.

 =========================================================

So, this is true story... P2000 G3 is not compatible at all with SCVMM 2012 !!!

Is anyone (did you listen HP?) able to help me and others with this?