P400 RAID 5

[gregersenj]

Well it a long shot with the FW.

If You havn't done so yet, the consider with a reboot.
And since you will take it down then.
Consider a FW upgrade also.

But I would check that it can reboot succesfully, before upgrading the FW.

Sure, it might not help either.

But you seem to have done everything correctly. So I have no better idea.

BR
/jag

[Kunal Raiker]

Thanks for your help so far,waiting to see if anyone else has some advise.

[gregersenj]

You're welcome.

Sorry i could not help you out.

BR
/jag

[Kunal Raiker]

bump

[RaphaelHung]

I have samilary problem. I am using HP Proliant DL380G5 Controler Smart Array P400. ACU version installed V 8.30.5.0, SmartStart CD ACU V 8.3.0. I swap array B two 147 GB disk with 300 GB disk, it rebuild successed with swap disk one by one. also add two 300 GB disk at bay 7 & 8. I cannot find menu option to extend the logical drive or expand the array. Please see attached file. Refer to message 12 above, how can I follow those 4 steps to make use of the new disks. I expect to make the bay 3 & 4 can access up to 300 GB, then expand bay 7 &8 to bay 3 & 4 to make the logical drive up to 600 GB.