POST Error: 1794- Drive Array Battery Failed

[Ian Briggs]

Hi there

Hope someone can help with this issue?

I have recently replaced a failed array battery on a Smart Array 6i Controller (Embedded) on a DL360 G4. It appeared to be working okay for 5 / 6 weeks after replacement.

It's now reporting to be in a failed state again.
The firmware version on the array controller is 2.80.

Are ideas?

[Sameer_Nirmal]

You may need to replace cache controller which provides the charge to the battery. I would order the BBWC kit and replace it to fix this problem.

[Peter Smeele]

Same issue here. We have firmware 2.84. Not on all servers, but, typpically, only with the servers were the battery was replaced shortly. It worked fine for a few days and then again wrong

[Peter Smeele]

We are going to try to replace the 128MB cache.

BTW the so called faulty battery works well with the 128MB cache module replacement, P/N#351518-001.

"Thanks to another thread in this forum"