Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

Hi,
Since the installation PSP 8.0 on BL465C in Windows 2003 SP1 French , I have errors in Event Viewer System ID Event: 1180
OS Information Agent: The logical Disk Performance Instance is failed with Disk Buzy Time of 100 percent
SNMP TRAP : 19008 in CPQWINOS.MIB
I have re-installed PSP 7.91 all is ok
Thanks for your assistance
9 REPLIES
Andrea Giangone
Occasional Advisor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

I have experienced the same problem on any server I have deployed PSP 8.0
If anyone can suggest a solution, it would be much appreciated.
Steve T Griffiths
Occasional Visitor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

I have a similar problem with a Raid 1+0 setup (2 disks) on a DL380, and I can't seem to attribute the issue which keeps reoccurring to anything else. I recently installed the latest controller updates via my VCA. Has anyone had issues with this?
mjr1885
Occasional Visitor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

I have the same issue with PSP 8.0 on a DL380G3 running Windows 2003 SP2.

Any way to fix this short of downgrading back to 7.91?

Thanks.
Santiago Spagnuolo
Occasional Visitor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

Did you find a solution?

Thanks.
Eric_371
Occasional Advisor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

Did you find a solution?

Thanks.
Eric_371
Occasional Advisor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

To disable the monitoring of Logical Disk busy time, simply go to :

1) HP System Management Homepage
2) Operating System
3) Logical Disks
4) remove the threshold from the drive you receive the alarm !

5) Save Thresholds.

Finish !
clembo
Occasional Visitor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

Sorry, but there is no such "2) Operating System."

Where exactly can I find the option to disable the threshold?

Thanks



To disable the monitoring of Logical Disk busy time, simply go to :

1) HP System Management Homepage
2) Operating System
3) Logical Disks
4) remove the threshold from the drive you receive the alarm !

5) Save Thresholds.

Finish !
Proliantstud
Frequent Advisor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

Hi,

Install the latest PSP 8.11 (A) 15 Sep 2008, and check the issue. You can also upgrade the firmware before the upgrade of PSP. I recommend an offline firmware upgrade. This will install all the supplemental firmwares (Hard disk firmware).

Firmware: 8.20 (31 Jul 2008)
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=3621769&prodNameId=3621782&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-3d1aaa0b48c04b628789e598d3

Unzip the file and burn the ISO to a CD. Boot the server using the CD
To deploy components offline:
1. Boot the server from the Firmware Maintenance CD .
2. At the prompt, select a language and keyboard.
3. Click Continue.
4. Read the End-User License Agreement. To continue, click Agree. The Firmware Maintenance CD interface appears.
5. Click the Firmware Update tab.
6. Click Install Firmware. The HP Smart Update Manager is initiated.

After the firmware upgrade, update the PSP from the following link.

PSP 8.11
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=3709945&prodSeriesId=3621769&prodNameId=3621782&swEnvOID=1005&swLang=8&mode=2&taskId=135&swItem=MTX-c9bcb7244b704812ab33633850

Cheers,
Anand
Server-Support
Super Advisor

Re: PSP 8.0 W2K3 The LogicalDisk BusyTime performance property is set to critical

OK, so this is expected to happens with older software & firmware version ?