Pointer to the latest EVA 5000 hardware configuration guide

[Chow Huey Jiun]

I'm looking for the latest EVA 5000 hardware configuration guide, because there are feedbacks that HP has changed the EMU junction box (from dual ports per junction box to single port per junction box) and the EMU ID connected.

Any help is vey much appreciated...

[KurtG]

Haven't seen any infomation regarding "new" EMU boxes.

Most current documentation should be avaliable from;

http://www.hp.com/go/eva5000 (use the link called "Technical Documentation"

KurtG

[Uwe Zessin]

It might be the flexible EAB cabling as introduced on the EVA3000 some time ago - see attached picture.

[Chow Huey Jiun]

Hi,

Thanks Uwe.. that's exactly the EMU box I have seen. If this is the design for EVA5000, where can I download the relevant documentation ?

There is a change in EMU ID used, previously for 2C12D, the ID used is 1,2,3,4,5,6,7,9,10,11,12,13,14. In this design ID 8 is used, ID 14 is dropped, i.e. 1,2,3,4,5,6,7,8,9,10,11,12,13

This are the info I could get my hand on...