Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Pointer to the latest EVA 5000 hardware configuration guide

Pointer to the latest EVA 5000 hardware configuration guide

I'm looking for the latest EVA 5000 hardware configuration guide, because there are feedbacks that HP has changed the EMU junction box (from dual ports per junction box to single port per junction box) and the EMU ID connected.

Any help is vey much appreciated...
3 REPLIES
KurtG
Regular Advisor

Re: Pointer to the latest EVA 5000 hardware configuration guide

Haven't seen any infomation regarding "new" EMU boxes.

Most current documentation should be avaliable from;

http://www.hp.com/go/eva5000 (use the link called "Technical Documentation"

KurtG
Uwe Zessin
Honored Contributor

Re: Pointer to the latest EVA 5000 hardware configuration guide

It might be the flexible EAB cabling as introduced on the EVA3000 some time ago - see attached picture.
.

Re: Pointer to the latest EVA 5000 hardware configuration guide

Hi,

Thanks Uwe.. that's exactly the EMU box I have seen. If this is the design for EVA5000, where can I download the relevant documentation ?

There is a change in EMU ID used, previously for 2C12D, the ID used is 1,2,3,4,5,6,7,9,10,11,12,13,14. In this design ID 8 is used, ID 14 is dropped, i.e. 1,2,3,4,5,6,7,8,9,10,11,12,13

This are the info I could get my hand on...