HPE Community
Disk Enclosures
1752793 Members
6314 Online
108789 Solutions
New Discussion

Possible to change logical drive number?

 
Steve Burke_2
Occasional Contributor

‎08-26-2004 04:57 AM

‎08-26-2004 04:57 AM

Possible to change logical drive number?

I have a Proliant 6000 with a Smart Array 3100ES controller in it. I am wanting to add some drives to it and configure a second array. Looking at the properties in the Drive Array Configuration Utilities, I see that the Array already in use is labeled as Logical drive 2. When I added some drives, they are labeled as Logical drive 1. I either need to relabel the logical volume numbers, or assign which one to boot from. Can anyone offer advice on this? The system is configured with Netware 5.0, and the overall goal is to add some additional space while keeping the existing system intact.
0 Kudos
Reply
1 REPLY 1
Greg Steer
Occasional Contributor

‎10-19-2004 11:55 AM

‎10-19-2004 11:55 AM

Re: Possible to change logical drive number?

Steve, Did you ever find a resolution to this problem? I have a ML570 with a Smartarray 5300 Controller with the exact same problem.

Greg
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.