Disk Enclosures
1745877 Members
4107 Online
108723 Solutions
New Discussion юеВ

Re: Problem with armdiscover & armdsp

 
SOLVED
Go to solution
Andrey Pevnev
Advisor

Re: Problem with armdiscover & armdsp

Can you please briefly describe upgrade procedure? Just swcopy && swinstall? Do I need to backup anything? Remove old version?
Thanks!
Torsten.
Acclaimed Contributor

Re: Problem with armdiscover & armdsp

Andrey,

if you are still on version 1.08, swremove
CMDVIEWSDM. The logfile is telling you to remove also the following:

CMDVIEWSDM
HPOVLIC
HPOVSAMDA
HPOVSAMHA
HPOVSAMJR
HPOVSAMSG
SMI_S_VA
SSLIC

no reboot needed.

Copy

/opt/sanmgr/commandview/server/config/PanConfigParams.txt
/opt/sanmgr/commandview/server/config/ContactInfo.txt
/opt/sanmgr/hostagent/config/access.dat
/opt/sanmgr/hostagent/config/commIpAddr.txt

and check if the files are modified.

Remove

rm -fR /opt/sanmgr
rm -fR /etc/opt/sanmgr
rm -fR /var/opt/sanmgr

Install version 1.09.01

check again the config files (see above).

Run "armdiscover".

That's it.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrey Pevnev
Advisor

Re: Problem with armdiscover & armdsp

Upgrade successful, thanks! ;-)