RAID Configuration

[Michael Paschke_1]

I have a HP Netserver LH3 running Netware 5.1. I also have three arrays RAID 0,1, &5. I recently took over these servers and I need to find out which hard disks are assigned to which array, preferrably without rebooting the server. I am pretty sure HP NetRAID has been setup. Can anyone help?

[kris rombauts · Accepted solution]

Hello Michael,

if you need to figure out this online in Netware you need to have the Netraid s/w loaded.

Pls download it or install from the Navigator cd's and it should be self explaining.
The Netware version of the Netraid s/w is very simmilar to the look and feel of the Netraid Express Tools (off line BIOS utility).

You can get it form here i.e. :

http://h20004.www2.hp.com/soar_rnotes/bsdmatrix/matrix62473en_US.html#Utility


Installing the Netraid monitor program also alerts you if a disk or logical drive fails. This can also be downloaded from the same url.


HTH

Kris

[Michael Paschke_1]

Thanks for the info. it was very helpful.

Mike Paschke