Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

RS12 FC, problems, lost configuration.

Andres Castillo Olmo
Occasional Visitor

RS12 FC, problems, lost configuration.

The configuration is a RS12FC with two controller cards, conected to a
HP Netserver LXr8500.

12 Disks 17 Gb

a. Raid 1 disks 1 and 2

b. Raid 1 disks 3 and 4

c. Raid 01 disks 5,6,7,8,9,10,11 and 12

After a power failure in a power suply, the FcArrayAssistant assistant
showed raid a, b and c corrupted.

Disk 2,3,8 and 9 apperared as new disks, with no green, red cross, or
any other symbol in the FCDiskArray.

The only posiblity that appeared in these disks was to place the as hot-
spare.

I did it, then I did put the offline, then rebuild, and it did work.

For the raid c, I did the same with one drive, and put hot-spare,
ofline and online with the other.

The system did recover, but why has this happened??? Is there anything
reported abut this kind of problem????

Thanks,

Andres.
ACO
1 REPLY
Marino Meloni_1
Honored Contributor

Re: RS12 FC, problems, lost configuration.

hi
difficult to identifie the cause but, check last fw version of rs12fc, check for power supply and cable, be sure grounding is ok, and that the voltage is good on the input connector of the storage.
bye
marino