1748169 Members
3747 Online
108758 Solutions
New Discussion юеВ

Re : MSA1000

 
Vincent_5
Super Advisor

Re : MSA1000

Hi guys,
Can Anyone guide me how can I configure the msa1000 with fibre link on a rp3410.

Regards
Vincent
nothing is better than to know more
3 REPLIES 3
Aykut Guven
Regular Advisor

Re: Re : MSA1000

Hello Vincent,

First you will need to make a firmware update over MSA 1000. You need a FC switch to make MSA 1000 connect to the server. I dont know why but I did not succed it without a SAN switch.

Good luck.
UPS
Uwe Zessin
Honored Contributor

Re: Re : MSA1000

Information is on the MSA1000's documentation page and you have to enable hard addressing if you use FC_AL.
.
JengShian
Occasional Contributor

Re: Re : MSA1000

There are two solution to connect MSA1000 in HPUX system.
one is HPUX_FC_HBA+FC_SAN_Switch+MSA1000(firmware is 4.32 or 4.38),
the other is HPUX_FC_HBA+MSA 1000(firmware must be 4.38)

see the webside for firmware information

http://h18006.www1.hp.com/products/storageworks/softwaredrivers/msa1000/msa1k_intel.html