Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Rebuilding RAID 1+0 array - Waiting for rebuild

Matthew Crumlich
Occasional Visitor

Rebuilding RAID 1+0 array - Waiting for rebuild

After replacing a failed drive, I keep getting the "waiting for rebuild" message in the ACU on the new drive. I have already contacted support who has sent me another drive and asked me to update my firmware. I have replaced the new drive with the newer one, updated the firmware, and after the system states it is rebuilding, I get the "waiting for rebuild" message. Now, support wants to replace the backplane. Why won't it complete the rebuild? Attached is the ADU report. Any help?
2 REPLIES
Diego Castelli
Trusted Contributor

Re: Rebuilding RAID 1+0 array - Waiting for rebuild

How about splitting and rebuilding the mirror?

here it is:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00378986/c00378986.pdf

Make a backup, first.

Hope this helps.

Diego.
Diego C.

MS MCSA Server 2003

HP Accredited Integration Specialist
e4services
Honored Contributor

Re: Rebuilding RAID 1+0 array - Waiting for rebuild

I am wondering whether HP has move their support overseas now. The answers we hear here sound too much like they are read off a sheet.
My answer would be that it sounds as if the controller is having problems with the data. I would do as discribed above. Break the mirror, backup the logical drive or drives, rebuild the RIAD and restore the data.
Hot Swap Hard Drives