Rebuilding RAID 1+0 array - Waiting for rebuild

[Matthew Crumlich]

After replacing a failed drive, I keep getting the "waiting for rebuild" message in the ACU on the new drive. I have already contacted support who has sent me another drive and asked me to update my firmware. I have replaced the new drive with the newer one, updated the firmware, and after the system states it is rebuilding, I get the "waiting for rebuild" message. Now, support wants to replace the backplane. Why won't it complete the rebuild? Attached is the ADU report. Any help?

[Diego Castelli]

How about splitting and rebuilding the mirror?

here it is:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00378986/c00378986.pdf

Make a backup, first.

Hope this helps.

Diego.

[e4services]

I am wondering whether HP has move their support overseas now. The answers we hear here sound too much like they are read off a sheet.
My answer would be that it sounds as if the controller is having problems with the data. I would do as discribed above. Break the mirror, backup the logical drive or drives, rebuild the RIAD and restore the data.