HPE Community
Disk Enclosures
1751851 Members
5358 Online
108782 Solutions
New Discussion

Relocate disks from S2P controller to S2DH controller

 
Ayman Altounji
Valued Contributor

‎06-04-2001 04:00 PM

‎06-04-2001 04:00 PM

Relocate disks from S2P controller to S2DH controller

I have 2 ProLiant servers, one with Smart-2/P controller, one with Smart-2/DH controller. Can I move the disks (NetWare 4.11 was installed) from the S2P server to the S2DH server without any configuration and data loss?
0 Kudos
Reply
1 REPLY 1
Ayman Altounji
Valued Contributor

‎07-24-2001 04:00 PM

‎07-24-2001 04:00 PM

Re: Relocate disks from S2P controller to S2DH controller

This should work. Just do not sop the order of the disks while moving them. If it does not boot, run the F10 setup and check that the RAID controller is set as the boot controller. I have successfully moved a RAID5 set of 4 disks from a 2DH to an RA4000 with no data loss.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.