Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Replacing 642 controller on ML350

Tim Osborn
Occasional Visitor

Replacing 642 controller on ML350

Event viewer informed us our RAID controller needed to be replaced. We just received the replacement 642 controller, and wanted to know the procedures for replacing the controller. From what we have read it sounds like we just replace the controller and the hard drives will configure the controller. Is it that simple?
1 REPLY
Torsten.
Acclaimed Contributor

Re: Replacing 642 controller on ML350

Yes it is. The controller will read the configuration from the drives (if all drives are there and ok).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!