HPE Community
Disk Enclosures
1753867 Members
7462 Online
108809 Solutions
New Discussion

Replacing 642 controller on ML350

 
Tim Osborn
New Member

‎04-16-2009 10:16 AM

‎04-16-2009 10:16 AM

Replacing 642 controller on ML350

Event viewer informed us our RAID controller needed to be replaced. We just received the replacement 642 controller, and wanted to know the procedures for replacing the controller. From what we have read it sounds like we just replace the controller and the hard drives will configure the controller. Is it that simple?
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎04-16-2009 10:07 PM

‎04-16-2009 10:07 PM

Re: Replacing 642 controller on ML350

Yes it is. The controller will read the configuration from the drives (if all drives are there and ok).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.