Community
Disk Enclosures

Reset to device, \Device\RaidPort0, was issued.

 
Petie
Occasional Contributor

‎06-01-2010 10:22 PM

‎06-01-2010 10:22 PM

Reset to device, \Device\RaidPort0, was issued.

I have a server DL 585 G1 that has Reset to device, \Device\RaidPort0, was issued .id 129 errors in the event logs but when I reboot they system as it boots and detects the controllers It hangs on "Slot 2 HP Smart Array" 1 Logical Drive 1775 - Slot 2 Drive Array - Storage Enclosure Not responding. SCSI port 1: Check storage enclosure power and cables. I am remote but I have confirmed the power is not an issue and all the drives are up. Is there anyway to test the cable or the drives? The local storage runs of the same controller so I am don't think it is the controller.
0 Kudos
Reply
1 REPLY 1
Jan Soska
Honored Contributor

‎06-03-2010 09:11 AM

‎06-03-2010 09:11 AM

Re: Reset to device, \Device\RaidPort0, was issued.

Hello, this looks like HDD failure - I sagust replace drive, it is very unprobable to be a cabling problem.

Jan
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.