HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

SA5304 migration, expansion RAID 1+0 to ADG

 
artm_1
Occasional Contributor

SA5304 migration, expansion RAID 1+0 to ADG

setup: DL380G2, SA5304, Win2K Pro, 2x18GB RAID 1+0, stripe 16KB

target: 6x73GB ADG

Waiting for replacement battery for the 5304 to arrive before I proceed but would like to confirm the procedure.

So, is this right:

1. remove 18GB #0
2. replace with 73GB and wait for rebuild
3. remove 18GB #1
4. replace with 73GB and wait for rebuild
5. insert 73GB #2-5 and migrate to ADG

Will this also expand the array to the new size ?