Is there any way to change the SCSI ID on a 3200 Controller? In order to create a cluster I need the SCSI ID on the two controllers (in different servers) to be different.
Additionally, is there a way to change the SCSI port IDs (external or internal) on an 1850R? I've been through the F10 utility and it allows me to VIEW the ID but not to CHANGE it, either on the system board or on the 3200 controller.
I understand that the HARD DRIVE IDs cannot be changed because they are set by the drive cage but I'm trying to change the ID of the 3200 controller or the internal/external SCSI connection on the system board.
I found no way to change the ID on the controller or the system board. So, I installed an Adaptec 2930U in one of the 1850Rs and changed its SCSI ID. Within about 30 minutes I had a working cluster server.
