HPE Community
Disk Enclosures
1753379 Members
5384 Online
108792 Solutions
New Discussion юеВ

SCSI ID of disk

 
Eric Jacklin
Regular Advisor

тАО09-05-2007 11:33 PM

тАО09-05-2007 11:33 PM

SCSI ID of disk

Hi,

Few days back we have replaced 2 disk drive from our storage(attached to Host via fiber).
So will it change SCSI ID of disk ?

In any case how should i check the SCSI id of the storage disk ?
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО09-05-2007 11:46 PM

тАО09-05-2007 11:46 PM

Re: SCSI ID of disk

What kind of storage is it?

It's fibre channel connected. Most FC storage devices are using FC connected disks too, there is no SCSI ID.
Pure SCSI enclosures have the ID mostly bound to the slot.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
tkc
Esteemed Contributor

тАО09-06-2007 01:53 AM

тАО09-06-2007 01:53 AM

Re: SCSI ID of disk

is your storage a disk array? if it is, you do not need to worry about the scsi id, it's being taken care by the array hardware. anyway, if you wanna know if the address of the disk (scsi id or wwn) has changed, just send us the 'ioscan -fnC disk' output from the system, before and after the replacement. if both appeared the same, then there is no changes in the hardware address of the disks.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.