Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

SMART-2DH Failure

Ken McDonald
Occasional Visitor

SMART-2DH Failure

I have a raid card that is failing, on and off. How can I save the RAID config and migrate to a replacement card to keep my RAID 1 config?
3 REPLIES
Arthur Chang
Frequent Advisor

Re: SMART-2DH Failure

Hi,
Array configuration is saved in disk,so if your array card failed,you can replace a new one,new array card can detect your server configuration from disk when server boot and initial array.
Regard
Ken McDonald
Occasional Visitor

Re: SMART-2DH Failure

Thanks. I did that with a spare SMART 2 dh and it worked. However the system is still failing. Do you know if this swap is possible with any SCSI RAID controller or just the SMART Family. I do not know the reliability of the new card. I need to upgreade firware on the card I just put in, it is a very old rev. if it is still failing then i need to re-evaluate.
Arthur Chang
Frequent Advisor

Re: SMART-2DH Failure

Hi,
If your original array card was Smart array 2DH,you can replaced by 2DH or newer,maybe 3200....., Remember set array controller order is first for boot in EISA Configuration.
Regards