Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

SW4354 -> SA642 -> DL560

Janaka_2
Occasional Contributor

SW4354 -> SA642 -> DL560

Hi,
Have a SW4354 connected to a DL560 (Win server 2003 Standard) via SA642 controllers.

The SW4354 (Ultra3 I/O module) have U320 15K drives in it as a 3 disk raid 5 and 2 disk raid 1 on each bus.

Each bus is connected to a SA642 card.

Also there are 2 U320 15K drives (raid 1) connected to one of the SA642 internally.

The array config utility picks up the internal drives as U320 but show all the drives in the SW4354 as Ultra2 (although they should show as U320 as well)

Does anybody have any idea why this would be so?