Disk Enclosures
1748245 Members
3688 Online
108760 Solutions
New Discussion юеВ

Re: Secure Path 4.0 and HSG80 Problem

 
SOLVED
Go to solution
axlr8fullrpm
Advisor

Secure Path 4.0 and HSG80 Problem

I have to servers both were installed with win2k3, both with 2 HBAs and fully redundant connection to my HSG80 contraoller. When I create a storageset and give an access to one of my server it will see four physical drives which i think is normal because Secure Path is not yet installed. After installing secure path and rebooting the server all disk drives cannot be seen on the disk management console and when i look at the device manager i found out that all disk has yellow exclamation point and stating that windows cannot load the driver. Please help!
14 REPLIES 14
Leon Rosier
Respected Contributor

Re: Secure Path 4.0 and HSG80 Problem

What ACS version do you have?
What HBA driver version?
What Secure Path version and service pack etc?

Leon
H├еkan Persson_1
Frequent Advisor
Solution

Re: Secure Path 4.0 and HSG80 Problem

Are you using V4.0C SP2-1 (or at least 4.0C) ? Earlier versions are not supported on W2k3.
axlr8fullrpm
Advisor

Re: Secure Path 4.0 and HSG80 Problem

I installed secure path 4.0C workgroup edition just now and the disk drivers were loaded but there is on more problem, the created logical drive is still detected as 4 physical drives, even the secure path is installed properly, by the way i am using HSG80 8.7
Uwe Zessin
Honored Contributor

Re: Secure Path 4.0 and HSG80 Problem

You need the 'enterprise' version of Secure Path.
.
axlr8fullrpm
Advisor

Re: Secure Path 4.0 and HSG80 Problem

Please see the attached screenshots
axlr8fullrpm
Advisor

Re: Secure Path 4.0 and HSG80 Problem

What is the difference between the Workgroup Edition versus Enterprise Edition of Secure Path?
H├еkan Persson_1
Frequent Advisor

Re: Secure Path 4.0 and HSG80 Problem

Workgroup Edition is for the MSA1000 only.
Uwe Zessin
Honored Contributor

Re: Secure Path 4.0 and HSG80 Problem

The difference is that the workgroup edition will do multipath filtering for a smaller range of supported storage arrays than the 'enterprise' version.
Well, and the price, of course ;-)
.
axlr8fullrpm
Advisor

Re: Secure Path 4.0 and HSG80 Problem

I'll install the enterprise version and i will let you know.