Service Manual for model20

[Renz Malabanan]

by the way, I connect it to the host D370 using scsi cable but the host could not recognized the storage..should I connect it to the single ended?

[Torsten.]

The array is high voltage differential scsi - obsolete since years.

You cannot connect it to a LVD controller.

[Renz Malabanan]

is there any way that the storage can be seen in that server??

[Torsten.]

You need a HVD SCSI card.


What do you want to do with this old box?


Today a single disk has much more capacity than this array can ever have.

[Renz Malabanan]

then during boot up the server could find the storage or the disk?

[Torsten.]

Probably yes.

[Renz Malabanan]

Thank you so much for your time and effort answering all my question,I really appreciate it..

Best regards.

[Renz Malabanan]

for console of high availability disk array M20 what kind of serial cable will do?

can it be a DB25 to BD9?
if so could it be RS232 DB9 to DB25 Pinout or RS232 DB9 to DB25 NULL Modem Pinout??

[Torsten.]

As said several times now you need a null modem cable.

[Torsten.]

The original part# was 5061-5003.