Disk Enclosures
1748051 Members
5270 Online
108757 Solutions
New Discussion юеВ

Re: Slow Disk Performance on an MSA30-SB

 
SOLVED
Go to solution
Rob Leadbeater
Honored Contributor

Re: Slow Disk Performance on an MSA30-SB

No the RP4440 is a PA-RISC device, not Integrity.

Anyway, to answer your question, it depends on the level of charge in the battery. If the replacement was completely flat I suspect you could be looking at least 12 hours.

Cheers,

Rob
cam9269
Regular Advisor

Re: Slow Disk Performance on an MSA30-SB

Thanks Rob, this is an improvement from my previous situation really. I'll just wait for it to finish then. Thanks!
cam9269
Regular Advisor

Re: Slow Disk Performance on an MSA30-SB

One more thing, so after the batteries have fully charged, I should be able to see the status set back to "OK" and cache write enabled, correct?
Rob Leadbeater
Honored Contributor

Re: Slow Disk Performance on an MSA30-SB

I believe so yes. I've never used SmartArray controllers on HP-UX servers, but on ProLiant servers that is what would happen.

Cheers,

Rob
cam9269
Regular Advisor

Re: Slow Disk Performance on an MSA30-SB

thanks! all is working fine