Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Smart Array P400 and EF0300FARMU, EF0300FATFD disks

nik-weter
Occasional Contributor

Smart Array P400 and EF0300FARMU, EF0300FATFD disks

Smart Array P400 in Slot 6
Bus Interface: PCI
Slot: 6
Serial Number: XXXXXXXXXXXXXX
Cache Serial Number: XXXXXXXXXX

RAID 6 (ADG) Status: Enabled
Controller Status: OK
Hardware Revision: D
Firmware Version: 7.24
Rebuild Priority: Medium
Expand Priority: Medium
Surface Scan Delay: 3 secs
Surface Scan Mode: Idle
Wait for Cache Room: Disabled
Surface Analysis Inconsistency Notification: Disabled
Post Prompt Timeout: 15 secs
Cache Board Present: True
Cache Status: OK
Cache Ratio: 25% Read / 75% Write
Drive Write Cache: Disabled
Total Cache Size: 512 MB
Total Cache Memory Available: 464 MB
No-Battery Write Cache: Disabled
Cache Backup Power Source: Batteries
Battery/Capacitor Count: 1
Battery/Capacitor Status: OK
SATA NCQ Supported: True

Array: A
Interface Type: SAS
Unused Space: 0 MB
Status: OK
Array Type: Data

 

Logical Drive: 1
Size: 558.7 GB
Fault Tolerance: 1+0
Heads: 255
Sectors Per Track: 32
Cylinders: 65535
Strip Size: 128 KB
Full Stripe Size: 256 KB
Status: OK
Caching: Enabled
Unique Identifier: 600508B1001047395356543259490033
Disk Name: /dev/cciss/c0d0
Mount Points: None
Logical Drive Label: A37771AEP61630G9SVT2YI734D
Mirror Group 0:
physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)
Mirror Group 1:
physicaldrive 2I:1:5 (port 2I:box 1:bay 5, SAS, 300 GB, OK)
physicaldrive 2I:1:6 (port 2I:box 1:bay 6, SAS, 300 GB, OK)
Drive Type: Data

physicaldrive 1I:1:2
Port: 1I
Box: 1
Bay: 2
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 15000
Firmware Revision: HPD6
Serial Number: XXXXXXXX
Model: HP EF0300FATFD
Current Temperature (C): 22
Maximum Temperature (C): 78
PHY Count: 2
PHY Transfer Rate: Unknown, 3.0Gbps

physicaldrive 1I:1:3
Port: 1I
Box: 1
Bay: 3
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 15000
Firmware Revision: HPD5
Serial Number: XXXXXXXXXXXXXXXXXXXX
Model: HP EF0300FARMU
Current Temperature (C): 25
Maximum Temperature (C): 55
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown

physicaldrive 2I:1:5
Port: 2I
Box: 1
Bay: 5
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 15000
Firmware Revision: HPD6
Serial Number: XXXXXXXX
Model: HP EF0300FATFD
Current Temperature (C): 23
Maximum Temperature (C): 76
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown

physicaldrive 2I:1:6
Port: 2I
Box: 1
Bay: 6
Status: OK
Drive Type: Data Drive
Interface Type: SAS
Size: 300 GB
Rotational Speed: 15000
Firmware Revision: HPD6
Serial Number: XXXXXXXXXXXXXXXXXXXX
Model: HP EF0300FARMU
Current Temperature (C): 27
Maximum Temperature (C): 87
PHY Count: 2
PHY Transfer Rate: Unknown, Unknown

 

 

As you can see, disk models. Write speed of not more than 5MB / s If you make an array of disks only one model - more than 300MB / s What can be done?

 

 

P.S. For your security, I have removed the serial numbers from your post - that's information you probably don't want to make publicly available. - HP Forum Moderator