Software for HP MSA30 with (14) 300GB SCSI and MSA1500 Shelf

[Software-FIS]

I need to download the drivers and software for the HP MSA30 with (14) 300GB SCSI and MSA1500 Shelf.

The driver page I found on the HP site directs me to support for the software. This is the HP page : http://bit.ly/cXL27g

[Torsten.]

Usually the MSA30 is either connected to an smartarray controller or an MSA1000/1500, so you only need to driver for the smartarray controller.

[Software-FIS]

Its connected to a MSA 1500 actually. Wich in turn is connected to a FC HBA.

But the ACU is not showing it to me. The San Configuration manager is detecting a SGA070601Z storage sub system. But only shows me 12 of the 14 drives to configure. I think I'm missing some software.

[Torsten.]

If ACU isn't showing the array, you maybe have SSP activated and the access is not allowed from this server. Check from another server or better via serial line.

Other tools most likely show the LUNs, but not the disks!

[Software-FIS]

Fixed :)
I do not have any acl's on the MSA 1500 :

CLI-1>show acl
ACL is disabled. To enable ACL use 'add acl'.

Also doing show disks only showed me 12 disks. Re tried after power cycle . And deleted connections and acl's . Now ACU shows me all disks and I can start using the array :)

Thnx.,