Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Support for CommandView 2.0

SOLVED
Go to solution
Chuck Ciesinski
Honored Contributor

Support for CommandView 2.0

To all,

Is HP still supporting CV-2.0 with 4.0 having been released? Is there a link on the HP ARRAY page with this info?

Really having a Monday...

Chuck
"Show me the $$$$$"
6 REPLIES
Steven Clementi
Honored Contributor

Re: Support for CommandView 2.0

Where/how are you using CV2.0? older CV's won't work with newer firmware, at least not properly. (assuming your talking about CV-EVA).

As for support, I doubt they even acknowledge it, but can't say for sure.


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
NPP3 (Nutanix Platform Professional)
Uwe Zessin
Honored Contributor

Re: Support for CommandView 2.0

Highly unlikely. CV-EVA V2.1, for example, did come with SMA V2.0 Service Pack 2 and did support HSV100 - VCS2.003 and HSV110 - VCS2.002.
.
florence mathon lermusi
Trusted Contributor
Solution

Re: Support for CommandView 2.0

Devender Khatana
Honored Contributor

Re: Support for CommandView 2.0

Hi,

For XP I think the latest version of command view in 2.1 only. Is not it ?

-Devender
Impossible itself mentions "I m possible"
Chuck Ciesinski
Honored Contributor

Re: Support for CommandView 2.0

To All,

Subsequent to the post, my datacenter team has advised me that both arrays are on 3.0. The link to the support page was VERY helpful. Thanks to all who replied.

Chuck
"Show me the $$$$$"
Chuck Ciesinski
Honored Contributor

Re: Support for CommandView 2.0

See my message about information from datacenter. We are 3.0 on both arrays.
"Show me the $$$$$"