Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Supported switch firmware with VCS 3.010 on EVA 5000

SOLVED
Go to solution
Blake Roberts
Frequent Advisor

Supported switch firmware with VCS 3.010 on EVA 5000

Folks,

I have been working with support on a wierd issue where I keep getting SCSI resets logged on a couple of servers. One of the questions they wanted me to research is to make sure that the McData switch firmware is at a version which is compatible with VCS 3.010. I have a McData 64M director (2 actually). Which firmware revision is the supported version, or where is there a link that would give me this information?

Regards,
--Blake Roberts
Electric Reliability Council of Texas
3 REPLIES
Uwe Zessin
Honored Contributor
Solution

Re: Supported switch firmware with VCS 3.010 on EVA 5000

Blake,
the latest information that I am aware of is in the SAN design guide (AA-RMPNL.TE) at:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&locale=en_US&docIndexId=179911&taskId=101&prodTypeId=12169&prodSeriesId=406734

See table 20 on page 75.
.
Blake Roberts
Frequent Advisor

Re: Supported switch firmware with VCS 3.010 on EVA 5000

That's exactly what I was looking for.

Thanks!
reg lustenhouwer
Occasional Advisor

Re: Supported switch firmware with VCS 3.010 on EVA 5000

Look here for general SAN support information.

http://h200005.www2.hp.com/bc/docs/support/SupportManual/c00093931/c00093931.pdf

SAN Design Guide

Reg