HPE Community
Disk Enclosures
1752555 Members
5166 Online
108788 Solutions
New Discussion юеВ

Re: Unable to add capacity at netraid controller

 
SOLVED
Go to solution
berendsen
New Member

тАО08-18-2001 02:24 AM

тАО08-18-2001 02:24 AM

Unable to add capacity at netraid controller

We have a LH pro with a netraid controller. We want to add a disk to a raid 3 ld. We aren't able to do this, because the current raid 3 system have a stripe size of 8kb. It should be 64 kb. If we can change the stripe size, we could add capacity.
Is there someone who can help us?

Regards Pascal
0 Kudos
Reply
2 REPLIES 2
RAMY NAGUIB
Frequent Advisor

тАО08-21-2001 12:03 AM

тАО08-21-2001 12:03 AM

Solution

Re: Unable to add capacity at netraid controller

Raid level migration and online change of configurations by adding more disk is supported only if the stipe set is 64 k.
Unfortunatle you need to back up all your file and re-construct the raid right from scratch
Good Luck
Ramy Naguib
Reply
berendsen
New Member

тАО08-21-2001 12:14 AM

тАО08-21-2001 12:14 AM

Re: Unable to add capacity at netraid controller

Thank you. We couldn't hope that have to re-construct the raid system. But we are now sure:-(

Regards Pascal
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.