Disk Enclosures
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to add capacity at netraid controller

SOLVED
Go to solution
berendsen
Occasional Visitor

Unable to add capacity at netraid controller

We have a LH pro with a netraid controller. We want to add a disk to a raid 3 ld. We aren't able to do this, because the current raid 3 system have a stripe size of 8kb. It should be 64 kb. If we can change the stripe size, we could add capacity.
Is there someone who can help us?

Regards Pascal
2 REPLIES
RAMY NAGUIB
Frequent Advisor
Solution

Re: Unable to add capacity at netraid controller

Raid level migration and online change of configurations by adding more disk is supported only if the stipe set is 64 k.
Unfortunatle you need to back up all your file and re-construct the raid right from scratch
Good Luck
Ramy Naguib
berendsen
Occasional Visitor

Re: Unable to add capacity at netraid controller

Thank you. We couldn't hope that have to re-construct the raid system. But we are now sure:-(

Regards Pascal