Unpresent iscsi host access to vdisk

[inex]

I managed to log inn via mpx manager and the software version is 2.0.9.0.
The customer got one mpx100 (I was onsite and checked)

But I do not have the password to log in via a telnet session.

In the mpx manager I can remove initiator.
Would that be a way to do it and then later be able to delete the vdisks assigned to this server? (3 servers have access to 11 luns).
Or should I downgrade the command view to fit the sw version on the mpx?

-inex

[marsh_1]

hi,

you could probably do that in this instance, but why not upgrade the firmware in the mpx ?

hth

[inex]

Is this something I can do online?
(there are live hostsconnected to the EVA)
I see that there is a fw update wizards in the gui.
And what about other components connected to the mpx100. Do they need upgrades as well?

-inex

[marsh_1]

hi,

the firmware upgrade on the mpx100 requires a reboot of the mpx100 so it would disrupt iscsi traffic. cv 7 + 6 work with that level of firmware in the mpx, see here for eva firmware requirements :-

http://h20272.www2.hp.com/utility/document.aspx?docurl=Shared%20Documents/hw/iscsi/iSCSI_EVA_mpx100_Stream_2009_05_04.pdf

hth